Garage floor already spoken for? Put your compressor on the wall.

This Stanley wall mounted air compressor combines a 2-litre receiver and a built-in 9m retractable hose reel in one compact unit. Handy for topping up tyres, inflating the guest bed and those quick blowing-off jobs around the garage, without dragging a compressor out every time.

• Wall mounted design: keeps valuable floor space free.
• Built-in 9m retractable hose: pull out what you need and reel it away afterwards.
• 2-litre receiver: a small reserve of compressed air for short jobs.
• Oil-free pump: no compressor oil to check or top up.
• 1.5HP motor: runs on a 230V single-phase supply.
• 8 bar maximum pressure: equivalent to 116 PSI.

Air where you need it, floor space where you want it

Between all the tools and all the random stuff you seem to have accumulated over time, garage space soon disappears.

This wall mounted compressor keeps the compressor and hose together, up out of the way. Pull out the airline when there’s a job to do, then retract it when you’ve finished. No separate hose coil to wrestle back into a corner.

The protective outer casing covers the internal mechanical parts, keeping everything neatly contained.

What can you use this Stanley air compressor for?

It’s a useful little setup for everyday inflation and short bursts of air, including:

• Topping up car and bicycle tyres with a suitable tyre inflator

• Inflating air beds, pool toys and other inflatables with the right adaptors

• Blowing dust and debris off suitable equipment

• Running compatible air tools with modest air requirements

The important bit is matching the compressor to the job. A 2-litre receiver is handy for occasional use, but it’s a small tank. If you’re planning to keep an air-hungry tool running, give us a call before buying. We’ll help you work out what you actually need.

A built-in hose reel saves the faff

You shouldn’t have to untangle an airline before you can put some air in a tyre.

The integrated 9m hose gives you reach around your work area while the compressor stays mounted in place. When you’re finished, the hose retracts into its housing, ready for next time.

Oil-free means one less thing to check

There’s no compressor oil to top up or change, which keeps routine upkeep simpler.

You’ll still need to follow the maintenance instructions and drain condensation from the receiver as directed. Oil-free saves you a job; it doesn’t mean you can forget maintenance altogether.

Technical specifications

Stanley Wall Mounted Air Compressor with 2L Receiver & 9m Hose Reel

Garage floor already spoken for? Put your compressor on the wall.

This Stanley wall mounted air compressor combines a 2-litre receiver and a built-in 9m retractable hose reel in one compact unit. Handy for topping up tyres, inflating the guest bed and those quick blowing-off jobs around the garage, without dragging a compressor out every time.

• Wall mounted design: keeps valuable floor space free

• Built-in 9m retractable hose: pull out what you need and reel it away afterwards

• 2-litre receiver: a small reserve of compressed air for short jobs

• Oil-free pump: no compressor oil to check or top up

• 1.5HP motor: runs on a 230V single-phase supply

• 8 bar maximum pressure: equivalent to 116 PSI

Air where you need it, floor space where you want it

Between the bikes, toolbox and all the things you’re definitely taking to the tip next weekend, garage space soon disappears.

This wall mounted compressor keeps the compressor and hose together, up out of the way. Pull out the airline when there’s a job to do, then retract it when you’ve finished. No separate hose coil to wrestle back into a corner.

The protective outer casing covers the internal mechanical parts, keeping everything neatly contained.

What can you use this Stanley air compressor for?

It’s a useful little setup for everyday inflation and short bursts of air, including:

• Topping up car and bicycle tyres with a suitable tyre inflator

• Inflating air beds, pool toys and other inflatables with the right adaptors

• Blowing dust and debris off suitable equipment

• Running compatible air tools with modest air requirements

The important bit is matching the compressor to the job. A 2-litre receiver is handy for occasional use, but it’s a small tank. If you’re planning to keep an air-hungry tool running, give us a call before buying. We’ll help you work out what you actually need.

A built-in hose reel saves the faff

You shouldn’t have to untangle an airline before you can put some air in a tyre.

The integrated 9m hose gives you reach around your work area while the compressor stays mounted in place. When you’re finished, the hose retracts into its housing, ready for next time.

Oil-free means one less thing to check

There’s no compressor oil to top up or change, which keeps routine upkeep simpler.

You’ll still need to follow the maintenance instructions and drain condensation from the receiver as directed. Oil-free saves you a job; it doesn’t mean you can forget maintenance altogether.

Technical specifications

Not sure whether it’ll do your job?

Tell us what you want to inflate, clean or run. We’ll help you choose a compressor that suits the work and the space you’ve got.

Have a look at our entire air compressor range, or shop for similar small air compressors.

Give Metro Sales a call for a bit of proper advice before you buy. 01932 348777